Our Services

The professional services performed by People360 cover the different aspects of Occupational Safety & Health that goes "Beyond Compliance"

As the foremost authority in providing OSH services, PEOPLE360  pooled all their professional expertise by providing a one-stop shop of services and solutions on OSH, specifically covering the following:

Testing & Inspection
TESTING &
INSPECTION
Industrial Hygiene
WORK ENVIRONMENT
MEASUREMENT
OSH Trainings
OSH TRAININGS
Safety Consultancy
SAFETY
CONSULTANCY
Non-Destructive Testing
NON-DESTRUCTIVE
TESTING
OH Laboratory
IH LABORATORY
First Aid Training
FIRST AID TRAINING

Testing & Inspection

Looking for a Third Party Heavy Equipment Testing & Inspection Organization? 

People360 is accredited by the Occupational Safety and Health Center (OSHC) of the Department of Labor & Employment (DOLE) with Accreditation No. 1410-24011624-0012 valid until January 16, 2027, We have a team of field-proven safety inspectors and consultants adhering to a strict methodology, based on industry standards, such as those from the Philippine Society of Mechanical Engineers (PSME) and American Society of Mechanical Engineers (ASME), as well as use of the proper measuring devices and instruments, to ensure its accuracy and safe-worthiness.

The types of equipment where People360 has experience and expertise include the following:

  • Crane
    (Gantry, Mobile, Tower, Overhead, Barge Mounted, Quay, Jib, etc.)
  • Boom Truck
  • Payloader
  • Backhoe / Excavator
  • Bulldozer
  • Grader
  • Compactor
  • Hoist
  • Skid Loader
  • Forklift
  • Dump Truck
  • Trailer Truck
  • Drilling Rig / Pile Driver
  • Manlift / Cherry picker
  • Gondola / Personnel Platform
  • Elevator / Material Lift
  • Dumbwaiter
  • Escalator
  • Skid Loader
  • Boiler & Pressure Vessel
  • Generator Set
  • Lifting/Rigging Accessories
    (Ex. slings, shackles, lifting beam, turnbuckle, pad eye, etc.)
  • Batching Plant
  • Other Mechanical Equipment

Accredited by the OSHC-DOLE, People360 is allowed to conduct WEM through various sampling and measurement methodologies on Categories 1A (noise, vibration, illumination, and heat), 1B (dust, heavy metals, organic solvents, acid, and other chemicals and gases), and 1C (general and local ventilation). Additionally, we may adjust and adapt to your specific WEM requirements.

WEM you want, WEM we have it at People360.

Work Environment Measurement

We got the solution to your IH requirements.

Have you ever wondered what Industrial Hygiene (IH) is and what is its role in health and safety at the workplace?

Based on the definition of OSHA, IH is "a science or art devoted to the recognition, evaluation, and control of those environmental stresses or hazards arising in or from the workplace, that may cause sickness, impaired health, and well-being, or significant discomfort and inefficiency among workers."

To determine these environmental stresses and their ill effects on workers' health through sampling and direct measurement using IH equipment, Work Environment Measurement or WEM is conducted in the workplace.

 

OSH Trainings

Attend OSH trainings via on-line and other different modes of trainings

OSHMS360 Corporation, the training arm of People360, conducts on-line training via virtual, webinars, video-based and collaborative learnings. Accredited as a Safety Training Organization (STO) by the Occupational Safety and Health Center (OSHC) of the Department of Labor and Employment, it has a full range of courses that covers all levels of an organization, from operational to executive levels using these different modes of on-line training. It also conducts several mandatory training sessions needed by a safety professional in the performance of his duties and responsibilities in a Philippine environment.

 
  • Basic Occupational Safety & Health (BOSH): Mandatory training by DOLE-BWC under Rule 1033 of Philippine Occupational Safety and Health Standards (as amended) and DO 16 series of 2001, which indicates that the “minimum qualifications, duties and number of required safety and health officers shall be as follows: 1) All safety officers must complete the Bureau-prescribed training course prior to their appointment as in their respective places of employment; 2) All full-time safety officers must meet the requirement of duly-accredited Safety Practitioners or Safety Consultants by the Bureau; and 3) Not less than the required number of supervisors or technical personnel shall take the required trainings and shall be appointed as a safety officer on a full-time or part-time basis, depending on the number of workers employed and the hazardous or non-hazardous nature of the workplace.” (40 hours)
  • Safety Orientation: Department Order No. 13 requires that all workers should undergo safety awareness seminar. Safety Orientation is necessary to acquaint workers on the basic principles safety and basic safety rules being implemented at the construction site. (4 hours)
  • Safety Awareness for Engineers, Supervisors & Site Safety Officers: This training program aims to provide participants with the basic knowledge on safety while supervising construction works. This will include activities that are necessary in the implementation of safety at the construction site. (2 days)
  • Scaffolding Safety: Designed to provide participants with the knowledge and skills on the different types of scaffolds, its application and principles safe erection of scaffolds. This will include classroom and actual application. (2 days)
  • Lifting and Rigging Safety: Designed to upgrade the knowledge and skill level of riggers on the principles of safe rigging. This will include classroom and actual application. (2 days)
  • Gondola Safety Training: Designed for Gondola operators, this is a prerequisite prior to allowing or authorizing them to work on or operate the gondola. Training includes lecture and actual use of the gondola, specifically the (a) operation of controls, daily check and inspection of safety devices, and (b) safe use of body harness. (1 day)
 

Among the consulting services are:

  • Processing of Permits (PTO):

    • DOLE Permit to Operate (Mechanical Equipment & System: Pressure Vessel, Boiler, Internal Combustion Engine, Elevator, Manlift/Dumbwaiter, Steam/Hydro Turbine, Power Piping Lines, Crane & Hoist etc.) and Certificate of Electrical Inspection
    • DENR Application for Pollution Source Installation, Discharge Permit, Environmental Compliance Certificate, Certificate of Non-coverage etc. 
    • ERC Certificate of Compliance for Generator Set 

    Engineering Services:

    • Preparation of As-built Plans for Structural, Architectural, Plumbing, Electrical, Mechanical and Electronics
    • Structural Analysis
    • Power System Analysis (Arc flash, Load Flow, Short Circuit, Voltage Drop Calculation, Protection Coordination, etc.)
    • Thermographic Testing
    • Insulation Testing
    • Preventive Maintenance of Equipment and Electrical Panel Boards & Components

    ISO Certification Assistance:

    • ISO 9001:2015 Quality Management System
    • ISO 14001:2015 Environmental Management System
    • ISO 45001:2018 Safety & Health Management System

Safety Consultancy

Everything you need in a safety program...

Recognizing that 70% – 80% of accidents and other occupational hazard are caused by human errors, consultants of People360 conduct various services that complement the other services and solutions that it provides

Backed by an accreditation from the OSHC-DOLE as a consultancy organization, the safety engineers of People360 have decades of experience developing, managing, and implementing safety programs. These experiences were documented based on the best practices and provided as consultancy services that are instituted in the safety strategies of various client firms.

Non-destructive Testing

Understanding what an NDT Testing is and its Benefits

People360 conducts Non-Destructive Testing (NDT), a procedure that locates and characterizes material conditions and flaws that might otherwise cause planes to crash, reactors to fail, trains to derail, pipelines to burst, and a variety of less visible, but equally troubling events. These tests are performed in a manner that does not affect the future usefulness of the object or material. Cognizant of the critical nature of this procedure, the engineers and technicians are provided with training and certifications at the Philippine Nuclear Research Institute (PNRI) on skills related to Liquid Penetrant Testing and Magnetic Particle Testing.

 NON-DESTRUCTIVE TESTING

 

The Industrial Hygiene Laboratory is capable of analyzing airborne occupational hazards.

  • Particulates (Total and Respirable Dusts, Alkaline Dust, Carbon Black, Oil Mist)
  • Acids (Sulfuric Acid, Phosphoric Acid, Hydrochloric Acid, Nitric Acid)
  • Alcohols (Ethanol, IPA, 2-Butanol)
  • Aromatic Hydrocarbons (Benzene, Toluene, Ethylbenzene, Xylene)
  • Ketones (Acetone, Cyclohexanone)
  • Ethyl Acetate
  • n-Hexane
  • Formaldehyde
  • Gases (NOx, SOx, NH3)

The IH Laboratory houses state-of-the-art analytical instruments, such as Shimadzu’s Nexis GC-2030 for gas chromatography, Hitachi’s U-5100 spectrophotometry, and Mettler Toledo’s MS105DU for gravimetric analyses.

IH Laboratory

Industrial Hygiene Laboratory (IH Lab)

The People360 IH Lab is an accredited Category III Sampling and Occupational Hygiene Laboratory recognized by the Occupational Safety and Health Center (OSHC) of the Department of Labor and Employment (DOLE). With the guidance of the OSHC and various published literature (e.g., OSHC Yellow Book, NIOSH Manual of Analytical Methods, etc.), the People360 IH Laboratory provides fast and accurate chemical analyses of WEM samples, helping evaluate workplace safety.

First Aid Training

OSHMS360 is now an OSHC-accredited First Aid Training Provider! With our wide range of offerings, including Standard First Aid and Basic Life Support-CPR Training, Occupational First Aid and Basic Life Support Training, and Emergency First Aid Training, we ensure you that your training requirements and needs are met with exceptional quality and reliability.

  • Emergency first aid training is a one-day (8-hour) training course designed for participants of the low, medium, and high-risk establishments with nine (9) and below workers where participants are provided with knowledge on day-to-day emergencies that laypersons may encounter until full medical treatment is available.
  • Occupational first aid and basic life support training is a two-day (16-hour) training course designed for participants of low-risk establishments with 10 to 50 workers where participants are provided with knowledge and skills to establish, maintain, and facilitate the provision of effective life support in a workplace environment until full medical treatment is available.
  • Standard first aid and Basic Life Support-CPR Training is a four-day (32-hour) training course designed for participants of medium and high-risk establishments with ten (10) to fifty (50) workers and low, medium, and high-risk establishments with fifty-one (51) and above workers. Participants will be able to respond to specific medical emergency situations before medical professionals are able to intervene, delivered in a traditional in-person classroom setting which combines lecture and hands-on skills sessions. This course also covers administering cardiopulmonary resuscitation (CPR) manually and using an automated external defibrillator (AED).
TOP